Professional spray application tools for consistent finish quality.

Description: The PC-G600P is a professional-grade gravity-feed cup designed for high-end spray gun models. Constructed from solvent-resistant resin, it combines lightweight handling with strong durability and secure spill protection.

• Capacity: 600ml
• Material: Solvent-resistant plastic or resin
• Fitting: G 1/4 inch, stainless steel
• Application: Ideal for automotive and industrial refinishing needing medium-to-large paint volume without metal-cup weight

Description: Part of the WIDER series, the WIDER4-14J2 improves on the classic W-400 design with a specialized air valve structure for more consistent trigger response and an ergonomic body for a better grip and center of gravity.

• Nozzle Size: 1.4 mm
• Air Consumption: 270 L/min, about 9.5 cfm
• Pattern Width: 300 mm
• Weight: 355g body only
• Application: Engineered for automotive topcoats and clear coats requiring smooth finish quality

Description: The Kiwami4 WBX is specifically optimized for modern water-based coatings. Its patented WBX split-nozzle technology creates an ultra-fine mist for even pigment distribution and reduced mottling or striping.

• Nozzle Size: 1.4 mm WBX split nozzle
• Atomizing Pressure: 0.24 MPa
• Pattern Width: 270 mm
• Material Output: 160 ml/min
• Application: Best for automotive waterborne basecoats that require precise atomization

Description: Sharing the same HTE atomization technology as the 1.3 mm version, this 1.8 mm model is designed to move thicker materials without sacrificing pattern consistency.

• Nozzle Size: 1.8 mm
• Technology: HTE, High Transfer Efficiency
• Air Consumption: 200 L/min, about 7.0 cfm
• Internal Parts: Stainless steel
• Application: Optimized for primers, fillers, and high-build coatings requiring larger orifice delivery

Description: The FLG-G5-18-C is a high-efficiency general-purpose gravity feed spray gun using DeVilbiss Trans-Tech atomization technology. It combines an ultra-light cast aluminum body with brass air caps and stainless steel fluid tips for durability, ergonomic handling, and reduced fatigue.

• Nozzle Size: 1.8 mm
• Air Cap: FLG-5, High Efficiency
• Air Consumption: 277 L/min, 9.8 cfm at 2.0 bar
• Cup Capacity: 560ml acetal gravity cup
• Construction: Anodized aluminum body with stainless steel needle and nozzle
• Application: Optimized for solvent-based lacquers, adhesives, oils, stains, varnishes, sealers, undercoats, primers, and high-build materials

Description: The Advance HD ADV-G510-14 is a professional spray gun with a high-capacity air passage and linear air valve for unrestricted airflow and superior atomization. Its forged aluminum construction and high transfer efficiency make it a durable all-rounder.

• Nozzle Size: 1.4 mm
• Atomization: Trans-Tech compliant
• Air Consumption: 283 L/min, 10.0 cfm
• Weight: 482g gun only
• Inlet Pressure: 2.0 bar, 29 psi
• Application: Precision automotive painting and industrial finishing for base coats and high-gloss clear coats

Description: The PROLite-GTE10-13-C is built for the automotive refinish market and offers excellent color matching on difficult materials such as low-VOC coatings, high-solids, and pearls. Its coaxial trigger air valve supports lighter pull and better fade-in and fade-out control.

• Nozzle Size: 1.3 mm
• Air Cap: TE10, Trans-Tech High Efficiency
• Pattern Width: 290 to 310 mm
• Air Consumption: 270 L/min, 9.5 cfm
• Body Finish: Gold anodized
• Application: Best for solvent-based base coats and clear coats, especially metallic and pearl finishes where mottling must be avoided

Description: Sharing the same ergonomic platform as the 1.3 mm version, the PROLite-GTE10-14-C is tuned for higher material flow and built for harsh shop conditions with a drop-forged aluminum body and removable air baffle.

• Nozzle Size: 1.4 mm
• Air Cap: TE10, solvent and all-rounder setup
• Fluid Flow: 160 to 190 g/min
• Weight: 446g gun body
• Inlet Thread: 1/4 inch universal
• Application: Ideal for 2K gloss, clear coats, and water-based base coats, plus woodworking, metal fabrication, and yacht finishing