Refinishing products for color match, prep, and durable topcoat finish.

Description: Nason 421-04 is a one-component specialty primer formulated to create a bonding bridge between flexible plastic parts and the following primer or paint layers. It helps prevent peeling or flaking when plastic parts such as bumpers or mirror covers flex.

• Type: 1K Polyolefin Adhesion Promoter
• Color: Transparent to slightly cloudy
• Mixing: Ready to spray, no thinning required
• Flash-off Time: 10 to 20 minutes at 25°C before the next coat
• VOC: 6.5 lbs/gal ready-to-spray
• Coverage: Approximately 100 to 120 sq. ft per gallon
• Application: Apply one medium-wet coat over properly cleaned PP, EP, TPO, ABS, and similar automotive plastics, then topcoat within 24 hours

Description: Nason 421-14 is a one-component nitrocellulose-based primer-surfacer developed for automotive refinishing where speed and sanding ease are top priorities. It fills sand scratches and minor imperfections well, making it a strong option for spot repairs.

• Type: 1K Nitrocellulose / Acrylic blend
• Color: Grey
• Mixing Ratio: 1:1.5 to 1:2 with Nason thinners or reducers
• Viscosity: 18 to 22 seconds in a Zahn #2 cup
• Dry Time: Sandable in 30 to 60 minutes at 25°C and topcoatable immediately after sanding and cleaning
• VOC: 4.8 lbs/gal ready-to-spray
• Application: Apply 2 to 3 medium coats on properly sanded and degreased bare metal, OEM finishes, or body filler, then sand with P400 dry or P600 wet

Description: Nason 421-14W is the white variant of the Classic 1K Primer series. It keeps the same fast-drying and easy-sanding characteristics as 421-14, while using high-quality white pigments to support bright or low-hiding topcoat colors.

• Type: 1K Nitrocellulose / Acrylic blend
• Color: White
• Mixing Ratio: 1:1.5 to 1:2 with Nason thinners or reducers
• Hiding Power: Designed to block dark substrates in about 2 coats
• Dry Time: Sandable in 30 to 45 minutes at 25°C and topcoatable after sanding and dust removal
• Compatibility: Compatible with all Nason 2K topcoats and basecoats
• Application: Best as an undercoat for bright, light-toned, or neon automotive colors, typically sanded with P600 or finer before high-gloss topcoats

Description: Nason 497-16 Classic White is a direct-gloss topcoat that provides both color and protective gloss in one step. It is widely used for fleet vehicles, commercial trucks, and cost-effective automotive resprays because of its strong hiding power and resistance to weathering and chemicals.

• Type: 2K Urethane, Direct Gloss
• Color: Classic White, solid
• Mixing Ratio: 8:1:2 (8 parts paint, 1 part activator, 2 parts reducer)
• Pot Life: 2 to 4 hours at 25°C
• Dry Time: Tape free in 6 to 8 hours, full cure in 24 hours air dry or 30 minutes at 60°C bake
• Gloss Level: 90+ units at 60°
• Application: Best over Nason 2K primers or sealers, applied in 2 to 3 medium-full coats with 10 to 15 minutes flash-off between coats

Description: Nason 483-71 is a polyurethane activator designed for use with Nason 2K topcoats and clearcoats. Its isocyanate chemistry converts the paint into a hard, durable film while balancing open time and hardening speed for a smooth finish without sagging.

• Type: Polyurethane Hardener, isocyanate based
• Compatibility: Nason 2K urethane topcoats and Nason clears
• Appearance: Clear liquid
• Density: Approximately 0.95 to 1.05 g/cm³
• Safety: Requires a supplied-air respirator due to isocyanate content
• Application: Add according to the topcoat or clearcoat mixing ratio, stir thoroughly before thinner, and use best between 20°C and 30°C
• Storage: Keep tightly sealed because air and moisture can crystallize the activator

Description: Sikkens Antisilicone is a solvent-based cleaning agent designed to remove stubborn contaminants that can cause fish-eyes, cratering, and poor adhesion. It creates a chemically clean surface for premium refinishing work.

• Specification: Solvent-based, high-purity formulation, clear liquid, fast-acting evaporation, compatible with metal and existing paint surfaces
• Application: Apply generously with a lint-free cloth, then immediately wipe off with a second dry cloth before evaporation
• Benefit: Prevents surface contamination defects in final clearcoat

Description: Sikkens M600 is a general surface prep cleaner that removes lighter oils, fingerprints, and sanding dust while leaving no residue. It is widely used as a final wipe before coating application.

• Specification: Low-toxicity solvent, moderate evaporation speed, VOC compliant, safe for cured OEM finishes
• Application: Use wet-on, dry-off with two cloths, especially on large areas needing consistent cleaning time
• Benefit: Cleaner substrate with reliable coating bond

Description: Sikkens Colorbuild Plus White is part of a six-color primer system that can be used as a high-build surfacer or converted into a wet-on-wet sealer. It offers excellent filling, hold-out, leveling, and adhesion.

• Specification: High-solids polyurethane, variable mixing ratio for sanding or non-sanding use, excellent hold-out, white base for light topcoats
• Application: Apply 2 to 3 coats as a surfacer for deeper imperfections, or one smooth coat as a wet-on-wet sealer
• Benefit: Better color coverage with less topcoat usage

Description: Sikkens Hardener P25 is a premium poly-isocyanate activator that helps primers and fillers cure through to the substrate for lasting hardness and durability.

• Specification: Isocyanate-based, medium-speed curing, clear liquid, optimized for 20°C to 25°C, high chemical resistance
• Application: Mix with Colorbuild Plus or compatible primers according to the technical data sheet and allow short induction if required
• Benefit: Reliable work time with consistent cure performance

Description: This rapid hardener is designed for high-production environments where primer surfacers must reach a sandable state quickly without compromising feather-edge sanding or film integrity.

• Specification: Accelerated curing agent, short flash-off, low VOC, high-density crosslinking
• Application: Use with Sikkens Autosurfacer Rapid for air-dry sanding in about 45 to 60 minutes and fast spot repair processes
• Benefit: Faster booth throughput and reduced repair cycle time

Description: Sikkens 1K All Plastics Primer is a fast-drying adhesion promoter that bonds to common plastics such as PP, EPDM, and ABS while preserving the substrate texture.

• Specification: One-component, transparent to silver-grey tint, fast drying in 5 to 10 minutes, broad plastic compatibility
• Application: Spray one light even coat on a cleaned and scuffed plastic surface and allow it to flash matte before the next layer
• Benefit: Simplifies plastic refinishing without separate hardener mixing

Description: Sikkens Autoclear Xcel is a world-class polyurethane clearcoat developed for easy use and brilliant finish quality on both spot repairs and full-body resprays.

• Specification: Two-component high-gloss system, excellent UV resistance, high-build film thickness, superior flow and leveling
• Application: Apply two full coats with 5 to 10 minutes flash-off, then bake at 60°C for 30 minutes or air dry overnight
• Benefit: Smooth polished finish with minimal correction work

Description: Sikkens Autoclear Pro Xpress is engineered for rapid-cycle refinishing, offering very fast curing even at lower temperatures while maintaining strong gloss and durability.

• Specification: Ultra-fast drying polyurethane, high-solids content, strong gloss retention, optimized for spot and panel repairs
• Application: Apply in two coats, typically a half-coat followed by a full coat, with dust-free time as low as 10 to 15 minutes
• Benefit: Faster customer turnaround in express repair environments

Description: Sikkens Plus Reducer Medium is a high-purity thinner used to adjust the spray viscosity of Sikkens basecoats, primers, and clearcoats for professional-grade texture and flow.

• Specification: High-purity solvent blend, medium evaporation rate, designed for 20°C to 30°C, improves flow and metallic orientation
• Application: Add typically 10 to 20 percent according to the paint system and use for immediate spray-gun cleaning after use
• Benefit: Better leveling while reducing sagging and solvent-pop risk

Description: Duxone DX25 is a versatile 2K activator that triggers chemical cross-linking in the Duxone repair system. Formulated with high-quality isocyanates, it is balanced for standard drying speeds and helps the paint film achieve full hardness, chemical resistance, and long-term durability.

• Type: 2K Polyurethane Hardener
• Compatibility: Designed for DX60 and DX64 series surfacers and select Duxone clearcoats
• Mixing Ratio: Varies by product, commonly 4:1 or 2:1 depending on the base material
• Color: Clear, water-white liquid
• Density: Approximately 0.98 g/cm³
• Shelf Life: 1 year when kept tightly sealed
• Application: Add to the base material before any thinner and use best between 18°C and 25°C
• Safety and Storage: Requires proper respirator protection and must be protected from humidity; cloudy material should not be used

Description: Duxone DX40 is a two-component polyurethane clearcoat made for clear-over-base applications. It delivers a durable, high-gloss finish and is popular for its user-friendly application across both spot repairs and full vehicle resprays.

• Type: 2K Polyurethane Clearcoat
• Mixing Ratio: 2:1 with Duxone Activators like DX25
• Viscosity: 14 to 16 seconds, DIN 4 cup at 20°C
• Pot Life: 4 to 6 hours at 20°C
• Dry Time: Dust free in 20 to 30 minutes, handle in 8 to 10 hours at 20°C, bake 30 minutes at 60°C
• Application: Apply over clean flashed-off basecoat in 2 full coats with 5 to 10 minutes flash-off, using a 1.3 to 1.4 mm nozzle at 2.0 to 2.5 bar
• Polishing: Polish after full air dry or after the surface cools following a bake cycle

Description: Duxone DX62R is a high-solids 2K primer-surfacer with a reddish-brown tint that combines corrosion protection with high-build filling. Its contrasting color helps technicians spot high and low areas more easily during sanding, while its excellent vertical stability allows thick application without sagging.

• Type: 2K Polyurethane Primer-Surfacer
• Color: Reddish-Brown
• Mixing Ratio: 4:1 with DX25 Activator plus 10 to 15% thinner
• Build Thickness: 60 to 180 microns depending on coat count
• Sanding: Dry P400 to P500, Wet P600 to P800
• Application: Suitable on sanded bare steel, polyester putty, and cured OEM finishes, applied in 2 to 3 medium-heavy coats with 10 minutes flash-off
• Dry to Sand: 2 to 3 hours at 20°C or 20 minutes at 60°C
• Usage: Ideal for restoration work and heavy-duty commercial vehicles needing high build and corrosion resistance

Description: Wanda 2:1 Clearcoat is a two-component polyurethane clearcoat system designed for use over Wandabase HS basecoats. It is engineered as a universal solution robust enough for everything from small spot repairs to full vehicle resprays. Its high solid content and high viscosity allow for thicker build with fewer coats, while delivering deep mirror-like gloss and high UV resistance. It is also valued for user-friendly flow and leveling, which reduces the need for extensive polishing after drying.

• Mixing Ratio: 2:1:10% (2 parts Wanda 2:1 Clearcoat, 1 part Wanda 2K Hardener, 10% optional Wanda 2K Thinner/Reducer)
• Viscosity: 15 to 16 seconds (DIN Cup #4 at 20°C)
• Pot Life: 4 hours at 20°C with Fast Hardener, up to 5.5 hours at 20°C with Slow Hardener
• Spray Gun Setup: Gravity feed with 1.2 mm to 1.4 mm tip, pressure 1.7 to 2.2 bar at air inlet
• Drying Times: Dust free in 20 to 30 minutes, dry to handle in 8 to 12 hours, full cure by baking 30 minutes at 60°C object temperature
• Application: Used over Wandabase HS basecoats for spot, panel, or full vehicle refinishing

Description: Wanda PU Thinner is a high-purity specialized solvent blend designed for reducing 2K polyurethane topcoats, clearcoats, and primers. Unlike generic thinners, it is water-free, which is critical because moisture can react with PU hardeners and cause bubbles, gloss loss, or blooming. It is formulated for a balanced evaporation rate so the paint film can level smoothly into a mirror-like finish before the surface skins over.

• Chemical Base: Blend of glycol ethers, esters, and aromatic solvents
• VOC Content: Typically 100% volatile, 0% solids
• Flash Point: Approximately 25°C to 28°C
• Viscosity: Water-thin liquid for lowering spray viscosity of HS paints
• Shelf Life: 3 years in unopened containers stored between 15°C and 35°C
• Appearance: Clear, colorless liquid with ester-like odor
• Application: Used for viscosity adjustment in a typical 4:1:10% mix, pre-sanding surface cleaning on some substrates, and thorough spray-gun/tool cleaning after 2K use
• Environmental Adaptability: 407.04001 standard is best around 20°C to 25°C; slower/high-temp versions help above 30°C to prevent dry spray
• Important Note: Do not use Cleaning Thinner or NC Thinner for Wanda PU products because moisture and impurities can ruin gloss and durability